News

  • 0
  • 0

Global boron nitride powder market trend 2023-2027 What is Boron Nitride Used For? by Newsslapjaws

Risk aversion plunged on the positive news of the Russia-Ukraine talks. After several days of rising oil prices, the price of precious metals continued to fall. Domestic futures markets remain stable for the time being.

Back in international markets, WTI crude futures briefly dipped below $100 a barrel, while Brent crude hit its lowest intraday level in nearly two weeks. Spot gold briefly fell below $1,900 an ounce. Comex gold futures closed down 1.1 percent at $1,918.4 an ounce. Comex silver futures closed down 1.14 percent at $24.91 an ounce. "Recently, crude oil prices have been extremely sensitive to changes in geopolitical news." Traders believe that the current oil price is still in the broad impact, Ukraine will still be a premium in the case, although the market further decline, but should not be too pessimistic, it is recommended to wait and see for the time being. The Ukrainian premium is still there and there will be some volatility in the boron nitride powder market.

Cubic boron nitride (CBN) is a super-hard material synthesized by hexagonal boron nitride and catalyst at high temperature and high pressure. Among the super-hard materials which have been industrially applied, the hardness of CBN is second only to diamond. The thermal stability of cubic boron nitride is much higher than that of diamond, and it has greater chemical stability to iron series metal elements, so cubic boron nitride abrasives are widely used in the field of cutting and grinding of iron-based metal products.
 

Types of Cubic Boron Nitride CBN
There are two kinds of cubic boron nitride: single crystal and polycrystalline sintered body.
The single crystal is prepared by hexagonal boron nitride and catalyst at a pressure of 3000 ~ 8000 MPA and a temperature of 800 to 1900. Typical catalyst materials are selected from alkali metals, alkaline earth metals, tin, lead, antimony and their nitrides. The crystal forms of cubic boron nitride include tetrahedral truncated cone, octahedron, crooked crystal and double crystal. Industrial cubic boron nitride is available in black, amber and metal-plated surfaces, and the particle size is usually less than 1 mm.
 

Application of Boron Nitride Polycrystals in Metal Cutting
Cubic boron nitride polycrystal (PCBN) tool is a kind of super-hard material product which is composed of many fine grains (0.1μm 100μm) CBN.
 
It not only has high hardness and high wear resistance, but also has the characteristics of high toughness, chemical inertia, red hardness and so on, and can be sharpened by diamond grinding wheel. It shows excellent cutting performance in all aspects of cutting, and can achieve stable cutting at high temperature. it is especially suitable for machining all kinds of hardened steel, tool steel, chilled cast iron and other high hardness difficult-to-machining materials. The tool has the advantages of sharp cutting, good shape retention, high wear resistance, small unit wear, less correction times, and is conducive to automatic machining. it is suitable for all cutting processes from roughing to finishing.
 

Performance and Properties of PCBN
PCBN not only has most of the properties of CBN, but also overcomes the shortcomings of directional cleavage of CBN single crystal plane, and has many performance advantages.
 
1. High hardness. The hardness of PCBN tool is second only to diamond and much higher than that of cemented carbide and ceramic tools, so it can process hardened steel, cast iron and cemented carbide with hardness above HRC60.
 
2. High wear resistance. The wear resistance of PCBN tools is much higher than that of cemented carbide and ceramics, and its service life is usually 3 to 5 times longer than that of ceramic tools and 5 times to 15 times that of cemented carbide tools.
 
3. High chemical inertia. The chemical reaction between PCBN and iron group elements and their alloys is not easy to occur at 1200 to 1300, which overcomes the chemical affinity between polycrystalline diamond tools and iron, has high oxidation resistance, and the bonding and diffusion effect on various materials is much less than that of cemented carbide.
 
4. High thermal stability. The heat resistance of PCBN can reach 1400, which is much higher than that of diamond tools (700 to 800). It is proved that the cutting temperature above 1100 can still maintain high sharp cutting performance, which is suitable for dry cutting.
 
5. High thermal conductivity. Among all kinds of tool materials, the thermal conductivity of PCBN is 79.54W/(m·k), which is second only to diamond and much better than cemented carbide, and the thermal conductivity of PCBN will be improved with the increase of temperature.
 
6. Low friction coefficient. Compared with other tool materials, the friction coefficient of PCBN is low. The friction coefficient between PCBN and different materials is about 0.1 ~ 0.3, while that of cemented carbide is 0.4 ~ 0.6, and the friction coefficient decreases with the increase of cutting speed, so that the cutting force decreases and the phenomenon of chip sticking is reduced.
 

Application of Cubic Boron Nitride in Grinding Field
Cubic boron nitride grinding tools have excellent grinding performance, which can complete the processing of difficult-to-grind materials, improve productivity and effectively improve the grinding quality of workpieces. It can also strictly control the shape and size of the workpiece and improve the surface integrity of the workpiece after grinding, so as to improve the fatigue strength of the parts and prolong the service life.
 
Cubic boron nitride micro-powder is suitable for resin, metal, ceramic and other binder systems, can also be used in the production of polycrystalline composite sheets, can also be used as loose abrasives, grinding paste and so on.
 
Supplier of Boron Nitride BN Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality BN powder, please feel free to contact us and send an inquiry. ([email protected])

 

The Free Trade Agreement between India and the United Arab Emirates (UAE) has come into force on.

The UAE is the gateway to the Middle East, North Africa, Central Asia, and sub-Saharan Africa, said Subramaniam, a senior official at India's Ministry of Commerce and Industry.  The agreement will help boost bilateral trade in goods from $60 billion a year now to $100 billion a year within five years.

On 18 February 2022, India and the United Arab Emirates signed the Comprehensive Economic Partnership Agreement. With the entry into force of the agreement, 90 percent of Indian goods and 65 percent of UAE goods will enjoy tariff-free market access.

Apart from its FTA with the UAE, India is also pursuing FTAs with Australia, the UK, Canada, Israel, the European Union, and the Gulf Cooperation Council.

Influenced by international situations, the supply and prices of many boron nitride powder are still very uncertain.

Inquery us

Our Latest News

Global tantalum carbide powder market trend 2024-2030 The Most Heat-resistant Material in the World by Newsslapjaws

As the European Union tries to reduce its dependence on Russian energy, the Russian president recently said Russia would try to shift its energy exports to the east, adding that there was no way for European countries to give up Russian gas immediate…

Global niobium carbide powder market trend 2025-2028 Is Niobium Carbide NbC Hard? by Newsslapjaws

Roche and its subsidiary TIB Molbiol have developed a series of tests for the detection of the monkeypox virus, the Switzerland-based pharmaceutical company announced. The monkeypox virus is a close relative of the smallpox virus, belonging to orthp…

Global market trend 2024-2029 The impact of the international oil price slump on the shipping companies from china to uk market by Newsslapjaws

Oil prices plunged on July 5th to their lowest level in nearly three months. By the end of the day, U.S. CRUDE for August delivery was down $8.93, or 8.24%, at $99.50 / BB…