News

  • 0
  • 0

Introduction to Titanium Carbide TiC Powder

A Brief Introduction Titanium Carbide TiC Powder

Titanium carbide or TiC is a classic transition metal carbide featuring a NaCl hexagonal crystal structure. a high melting point, hardness and a high Young's modulus. It also has excellent chemical stability, high wear and corrosion resistance and high electrical conductivity and thermal conductivity. This means it can be used in an extensive range of applications and has a great potential in cutting tools, aerospace components, wear-resistant coatings, foam ceramics and infrared radiation materials.

Utilization of Titanium Carbide TiC Powder

1. Utilized to create various multiphase materials

Titanium carbide ceramics are high-density tool materials like TiC and TiN, WCand A12O and other raw materials made from various multiphase ceramic materials These materials possess a extremely high melting points, a high hardness with excellent chemical stability. is the preferred material to use for cutting tools, wear-resistant and other parts in addition, they are extremely electrically conductive which makes them the best choice for electrodes.

Cutting tool materials: Due to a percentage of TiC hard particle dispersion in the matrix, the Composite cutting tools do not just improve the toughness however, they also, to a some extent, enhance the fracture toughness, higher than the raw tool's cutting. Cutting performance is a lot. A12o3-tic ceramics can serve as armor materials. As a material for tools, its hardness is superior to (C, N), and Ti(C, N) due to N. To use it on steel as well as other cutting materials the friction coefficient greatly reduced. Brings many advantages to cutting. Through the combination of the advantages of Ti and (C N, C) to form multiphase ceramics, it is a promising tool material can be prepared.

2. For coating purposes, they are used as materials.

Diamond coating: This manufacturing process of diamond tools uses mostly the impregnation process using powder metallurgy method. Because of the large interaction energy between diamonds and common metal or alloy, the surface of diamond is not coated with metal or alloy that have a low melting temperature and the bonding performance is poor. In recent years, many scientists have conducted a large amount in research that has helped improve the strength of bonds between diamond and the metal matrix. The method that is active is the most widely used and involves adding the tiny amount of titanium into the metal bond vanadium and chromium as well as other active metals. Using these tools for sintering in liquid phase The active metal is high carbon compounds that form elements and the diamond affinity is enormous, and allows for increase the surface of the diamond which allows the metallurgical union of metal bond and diamond. The strength of the interface depends on the quantity of active metal, sintering temperature duration, as well as others, and needs the dissolution of the binder in order to enable the enrichment of active metal towards the interface as this method isn't suitable for hot press sintering of the diamond and metal powder in a relatively short solid phase.

3. The foam ceramics are used to prepare

As a filter, ceramics are capable of removing inclusions in any fluid, and its filtration mechanism is the agitation and adsorption. The filter needs the chemical stability of the materials, particularly in the metallurgical sector with a high melting point filtering, which means this type of material can become oxide generally, but also to be able to adapt to the metal melts, which is the major goal with respect to resistance against thermal shock. Titanium carbide foam clays have higher strength, hardness, heat and electrical conductivity, in addition to corrosion resistance and heat in comparison to oxide ceramics.

4. Used in infrared radio ceramic materials

Titanium carbide is an example of intermetallic compoundthat has generally shows good chemical stability with not undergoing any changes in valence and, when the system is subject to high-temperature reduction of the preparation of samples. The components of titanium ions are prone to delay to appear, intending to melt the titanium ion into the structure of the cordierite structure position, change of the structure. When compared to one material it is more effective in radiation. the material near 3tma is definitely improved, which is suitable for use in the area of high temperatures.

Main Manufacturer of Titanium Carbide TiC Powder

We are a reputable chemical material provider and manufacturer with over 12 years of experience providing premium chemicals and Nanomaterials, such as silicon powder, nitride powder, Zinc sulfide, graphite calcium nitrideand 3D printing powder and more.

If you're seeking premium titanium carbide TiC Powder contact us today. contact us to send us an inquiry. (brad@ihpa.net)

Inquiry us

  • tags

PREVIOUS NEWS

What is Aluminum Nitride

NEXT NEWS

Our Latest News

Introduction to Titanium Carbide TiC Powder

A Brief Introduction Titanium Carbide TiC Powder Titanium carbide or TiC is a classic transition metal carbide featuring a NaCl hexagonal crystal structure. a high melting point, hardness and a high Young's modulus. It also has excellent chemical st…

What is Aluminum Nitride

What is Aluminum Nitride? It is renowned for its superior conductivity to heat and electrical insulating capabilities, aluminum Nitride is an excellent material to create semiconductors. In light emitter lighting technology, it can also be employed…

Application of graphene in batteries

Affectation of graphene in batteries Graphene is a very versatile molecule found in many different uses for batteries, among them. It's unique features include that include high conductivity outstanding mechanical properties, and outstanding electro…